8.1 Starting engine
The ignition is controlled either by a button or key, depending on the boat model or accessories.
Switch on the power using the main power switch.
Lower the engine into the driving position by pressing the power trim button on the gear/ throttle handle.
If the power trim button is not available, lower the engine manually.
Check that the gear is in the neutral position and that the emergency switch is attached to the bottom of the remote control.
Switch on the ignition using the power button/key on the steering console and wait a few seconds for the warning lights to light up.
Start the engine by pressing the start button/turning the key until the engine starts. The engine should start within 1-2 seconds. Do not try to start the engine for more than 10 seconds at a time.
Let the engine idle for a few minutes before setting off.
Read the engine manual for more detailed information about the engine.